Q: How do I know FillPro will be able to deliver a good process if I have a difficult powder to feed?
A: FillPro will gladly test your material sample at no cost to you.
If that is not possible for whatever reason, a demonstration of our capabilities can be arranged at your facility.
We have many years of experience in successfully filling difficult materials. As a result of this experience, we have developed an impressive array of techniques and hardware that have become our off-the-shelf FillPro technology.
Q: Is it possible to get field support for my Hierath, Summit MB and/or FillPro equipment?
A: Yes, this is possible. The FillPro Customer Service staff is well trained in the operation, maintenance and repair of the entire line of powder filling products and systems.
Whether you have a system that is not functioning properly, needs preventative maintenance performed, would like the scales certified, or you would like help improving system performance, FillPro is your solution.
FillPro Customer Service or Sales Department can also come to your facility and review your existing processes to determine if a FillPro manufactured system is right for you.
These are more technical in nature, involved in troubleshooting systems or servicing:
SYSTEM TYPE: ALL 6000 AND 7000 SYSTEMS
Q: How do I know my 6000 or 7000 weigh sensor is working properly?
A: There are some simple tests you can perform to verify that your scale is functioning properly.
The most important is "Offline Correlation". To perform this test, a known good analytical balance (scale) with resolution equal to or better than the filling system will be required.
This test should be completed on several samples.
For further information on Offline Correlation please contact FillPro Customer Service Department.
Another test would be a calibration test.
Simply perform several calibration processes and record the calibration errors.
The allowable calibration error is dependent on the equipment type, the range of the weighing device, the system settings, the environment and the process tolerance requirements.
For further information on Calibration Error please contact FillPro Customer Service Department.
Rough Repeatability and Return to Zero testing can be performed.
To perform this test,
If the differences between reported and actual are larger than expected, please contact FillPro Customer Service Department.
FillPro Inc recommends and provides an annual calibration and certification on 6000 and 7000 system scales for a flat rate.
Annual verification of the scales operational condition and adjustment of mechanical aspects of the scale as required will help ensure that the system is accurate in the delivery of the filling process.
|[Home] [About Us] [Products Page] [Product Applications] [Complete Solutions]
[Customer Support] [Product Inquiry Form] [Contact Us]